According to the 2010 United States Census, the older population is increasing at a faster rate than ever before. While the under 18 population grew at a rate of 2.6 percent between 2000 and 2010, and the population aged 18 to 44 grew by a mere 0.6 percent, the 45 to 64 age group grew at a rate of 31.5 percent. According to the Department of Health and Human Services Administration on Aging, the 60 and over population is expected to increase from 45.8 million in 2000 to 92.2 million in 2030, and to 112 million in 2050.
While an estimated 30 million Americans were edentulous in one or both jaws in 2001, that number is expected to increase to approximately 38 million by 2020 due to the increase in the aging population. Although such statistics should put this discourse to rest, they present the issue of whether to treat dental patients with dentures or implants, and which are better and for whom.
Not everyone is a candidate for implant dentistry. Patients with a history of uncontrolled diabetes, bisphosphonate use, or certain blood dyscrasias may not be suitable candidates for implant therapies without cooperation of their treating physicians and an understanding of the incumbent risks. Osseointegrated implants require conscientious oral maintenance.
Another crucial issue is the amount of bone available for appropriate implant placement and stability. A result of edentulism is the deterioration of the alveolar bone. The integrity of the bone is critical when determining treatment options. There must be sufficient bone structure to consider implants. Augmentation of the bone and ridge may be accomplished with a variety of methods and grafting mediums.
There are numerous treatment options for fully edentulous patients today. These include full upper and lower dentures, implant-assisted prostheses, and implant-supported prostheses.
Although implant-assisted prostheses “assist” retention and stability, soft tissue and bone are still relied upon to lend support to this type of prosthesis. With implant-supported prostheses, stability, retention and support are provided from the implant itself or from bars attached to the implants
The least complex implant-assisted prosthesis is the two-implant lower overdenture with locator connections or a bar. Designed with female attachments on the implant and male attachments on the inside of the denture the attachments fit together to provide retention. However, bone and soft tissue are responsible for most of the support. With the bar design, the bar is attached to fixtures screwed onto the implants. Clips are inserted into the denture and snapped over the bar. Although the denture is able to slightly rotate on the bar, this type of prosthesis provides primary stability and some retention. Both prostheses can be designed with two or four implants.
The maxillary and mandibular arches require a minimum of four implants to minimize rotation and torque, particularly when utilizing locators. Maximizing the distance between the anterior and posterior implants also minimizes rotation. These considerations are the same when utilizing the bar design. The anterior bar should be perpendicular to the midline of the palate to avoid off-centered rotational forces. The bar should not be in front of the implants because it creates abnormal torque. Using two implants and locator attachments is not a suitable treatment for the maxillary arch due to the dislodging effect of biting and the subsequent rotational forces and torque placed on the implants.
Risks and Benefits
The benefit of an implant-assisted prosthesis is that it’s removable and, therefore, easy to clean, especially for patients lax with their oral hygiene. Because they require fewer implants, there is less surgery, less technical demand for the dentists, and costs can be lower. esthetics can often be easier to achieve and the patient can receive the prosthesis faster.
On the other hand, not everyone prefers removable appliances. The flange may obstruct the esthetics. Internal attachments, particularly locators, need to be replaced every six months to two years, depending upon the patient and location of the implants. If utilizing a bar design, the patient will need to floss and maintain effective oral hygiene.
An implant-supported prosthesis is an implant on top of a milled bar, implants that support a hybrid, or eight to 10 implants using fixed bridgework. The milled bar is screwed into place, and the four to six implant prosthesis, the intaglio of the denture, is shaped to the bar. Some are designed with passive attachments, a push-button lever that snaps into a receptacle on the bar. A very solid design, the patient will have no movement with this prosthesis.
A hybrid prosthesis consists of a custom-milled titanium or zirconia bar, milled from an implant level impression or from a multi-base abutment impression. The denture teeth are fabricated over the top. Minimum diameter screw access holes do not jeopardize the integrity of the teeth or the prosthesis and result in minimal breakage.
There are several ways to provide a fixed implant-supported prosthesis. Implants can be placed in the molars, premolars, canines, and central sites with four bridges; a three-bridge design would consist of two posterior bridges and a six-unit anterior bridge. A bridge between canine and premolar with a pontic on a premolar and a cantilevered molar, with cantilevered laterals off the central incisors is an option, or a six-unit anterior bridge from canine to canine with splinted premolars and a cantilevered molar. According to the literature, a prosthesis cannot support a cantilever exceeding 1.5 times the anterior/posterior (AP) spread, which is the distance between the middle of the most anterior implants and the distal of the most posterior implants, without creating excessive stress on the implants or on the frame of the prosthesis (i.e., for an AP spread of 10 mm, the cantilever should not exceed 15 mm).
Risks and Benefits
Implant-supported prostheses can be fixed, or in the case of the bar-retained overdenture, attached and unmovable. Often, they don’t require a flange because the support comes from the implants. More implants provide greater stability, and when they’re fixed, as in a hybrid, or cemented, they perform like natural teeth. Hybrids and fixed prostheses can be less intrusive due to the elimination of the bar or framework.
There is a higher cost associated with implant-supported prostheses because they involve more implants and, therefore, more surgery, particularly if significant grafting is required. Those screwed into place or cemented are harder to clean. Treating a gummy smile may require significant bone removal to hide the margin of the prosthesis, which may require pink porcelain to avoid abnormally long teeth.
Indications for Immediate Placement in an Edentulous Arch
To place immediately loaded long-term provisional, adequate horizontal and vertical bone height is required to ensure primary implant stability. Primary stability of the implant means that the implant is stable to torque of 35 ncm. That can occur with 4mm of vertical bone height in dense bone. If four implants are available to load in the arch, long-term provisionals are suitable treatments, provided the AP spread is correct. If these parameters cannot be met, then immediately loaded long-term provisionals should not be considered as a treatment option.
Reference: Spear Education.